R1040 MAINTENANCE MANUAL
Page 2 of 48
1 General
Your engine needs
•
Clean High Speed Diesel oil.
•
Lubricating oil of specified quality and viscosity grade.
•
Fresh air for combustion of fuel, for cooling of engine.
•
Proper ventilation of engine compartment to avoid re-circulation of hot air.
•
Genuine spare parts for its maintenance.
1.1
Service and Maintenance
Sound service and maintenance practices will ensure that the engine continues to
meet your requirements. Recommended service intervals must be observed. The
service and maintenance work should be carried out conscientiously.
Special care should be taken under abnormally demanding operating conditions.
1.2 Maintenance and Repairs
Shut down the engine before carrying out maintenance or repair work.
When the work is complete, be sure to install safety devices that may have been
removed.
If you have to work on a running engine, ensure that all clothing is tight fitting and
cannot catch the moving parts.
Never fill the fuel tank while the engine is running.
Observe all industrial safety regulations when engines are operating in enclosed
spaces or underground.
Please contact your Distributor for Spare parts enquiry. Use only genuine spare parts.
1.3
Safety
All Safety instructions (for both engine and operator) in this manual are designed by
the accompanying symbol. Please follow them carefully.
The attention of operating personnel should be drawn to these instructions.
General safety and accident prevention regulations laid down by law must also be
observed.
2
Engine details –
2.1
PCV / CCV Arrangement –
PCV / CCV Arrangement only for COM stage II engine.
2.2 Engine Name Plate
Fig 2.1.1
