INSTALLING THE STRENGTHENING BAR & SERVING TRAY
Find the 4 screws used to attach the strengthening bar. Align the holes on the strengthening bar and the holes on the right
panel, and then tighten up the screws to assemble the strengthening bar. Tighten up the 2 screws from underneath also (see
the figure below) to further secure the strengthening bar.
Install the handles on the serving tray by align the holes on the serving tray and the handle, and then tighten up the screws.
Do this for the other side of the serving tray. Put the serving tray on top of the push bar to finish the assembly.
7