20
21
calls.
j. Silence -- display and set the ON/OFF of the mute of
Beep
and incoming calls.
k. Lamp -- display and set the ON/OFF of backlight on LCD.
l. Cmp Hunt -- display and set the ON/OFF of Comprehensive
Hunt.
m. SelSys -- set the Manual Selection of System.
n. Set Tmp Group -- set the Temporary Input Group.
5) You can also use the following combination keys to quick
view/set the parameters:
a
By PC software you can define the function of above
series of combination keys as displaying/setting: ID
code of the transceiver, current control channel, current
system code, TX power, ON/OFF of back light on LCD,
ON/OFFof Comprehensive Hunt, switch between
conventional mode and trunking mode, rotary encoder
lock.
6) All settings of above facilities, except
SetTmpGroup
and
SelSys
, can be adjusted only by Rotary Encoder. Press
Clear button to return to standby mode while adjusting.
.
0+
key
b.
1+
key
c.
2+
key
d.
3+
key
e.
4+
key
f.
5+
key
g.
6+
key
h.
7+
key
i.
8+
key
j.
9+
key
7) When
SelSys
displays, press
to select the system
manually.
SelSys xxxx xxxxxxxxxxxx
will be displayed.
(The exact display lies with the setting of system.)
a. Press
#
or PTT to select the system code manually. If
the function of selecting system code manually hasn't been
activated or this system code is prohibited to select
manually, it will return to trunking mode when press
#
key or PTT button.
b. Press
key to return to the menu.
8) When
SetTmpGroup
displays, press
key to set
Temporary Group.
SetTmpgroup x xxx
will be displayed
on LCD. (The exact display lies with the setting of system.)
a. Input the group call code of the Temporary Group through
the number keypad and end with
#
key. 3 temporary
groups can be stored in the transceiver.
b. Press Clear button to erase this group call code and then
Null
displays on LCD. Press
#
key to confirm.
c. Press
or
key or rotate the Rotary Encoder to
view the other 2 groups.
d. Press
key to return to trunking mode.
Viewing the Built-In Contact List
1) The built-in contact address can only be edited through PC
programming software. The setting categories are:
group/individual call, hide group, dialing number.
2) You can set 180 group/individual calls, 50 hide groups, and
20 groups of dialing numbers.
3) Rotate the Rotary Encoder to view the contacts in standby