11
10
To remove the battery pack:
1) Use your thumb to press the belt
clip, and one side of your index
finger to press the release button;
2) And then pull the battery away from
the transceiver.
Screw the antenna into the con-
nector at the top of the transceiver
by holding the bottom of the
antenna and turn it clockwise until
secure.
Match the grooves of the belt clip
with those on the rear of the battery.
Then press the support belt clip
downwards to lock it in place.
When not using the optional
Speaker/Microphone, install the dust
cover over the versatile connector
with the supplied screw.
Installing the Antenna
Installing the Belt Clip
Installing the Dust Cover over the
Versatile Connector
Insert the Speaker/Microphone plug
into the jacks of the groove
versatile connector, and fix it with
the supplied screw.
Notes:
1) Only use the KIRISUN Speaker/
Microphone.
2) Two optional models are available:
KME-68A Speaker/Microphone and
KME-68B Earpiece-Microphone.
3) The Speaker/Microphone is for
option only. If you want to purchase
one, please contact the local
KIRISUN dealer.
Installing the Optional Speaker/
Microphone Versatile Connector
GETTING ACQUAINTED
Radio Overview
A LED Indicator
Lights red while transmit-
ting in both TRUNKING
mode and CONVENTION-
AL mode; lights green
while receiving in TRUNK-
ING mode and flashes red
while battery power app-
ears low.
