DM588 Digital Mobile Radio User Manual
13
Attentions
The radio should be installed in a position where it can be used conveniently and personal
injury can be avoided while driving a vehicle in poor road condition.
While drilling holes, protect the internal wires of a vehicle or of other devices from being
damaged.
Leave enough space behind the radio for wiring.
Make sure the power cord is long enough so that the radio can be maintained with the power
connected.
While replacing the fuse, make sure a fuse meeting requirements is used.
Installation Steps
1. Use the ST5*16 self-tapping screw to install the bracket at a position in a vehicle where
operation is convenient.
2. Use the wing screws to fix the mobile onto the bracket.
3. Wire the 3m power cord, and connect the open end to the engine battery or other power
supply (with supply voltage not higher than 16V). Make sure the red wire is connected to the
anode and the black wire to the cathode.
4. Install the supplied fuse, and connect the power plug to the power interface at the rear of the
radio.
Summary of Contents for DM588-02
Page 1: ......
Page 11: ...DM588 Digital Mobile Radio User Manual 4 SN Item SN Item ...