38
TURBO-SANDING SET-UP (cont)
Insert the Attachment Hose into the end of the Turbo Accessory.
Grip the Sander at the front and rear and turn the Sentria®
system ON. Then press the ON button on the top of the Sander.
While applying light pressure, move it over the surface slowly.
Allow the Sander to do the work. Don’t force it or lean heavily on it.
The tool works best at high speed.
❏
6
Optional Accessories
TURBO POLISHING
Attach the synthetic lamb’s wool pad using the same procedure as
attaching sandpaper (see page 37). The Turbo Accessory now becomes
a polisher. Use it for polishing hard waxed surfaces, such as table tops,
paneling, and large flat surfaces. It can be used to polish cars.
The Dust Shroud is not used when polishing.
❏
TURBO SCOURING
Attach the webbed nylon scouring pad using the same procedure as
attaching sandpaper (see page 37). The Turbo Accessory now becomes a
scouring tool. Use it for scouring hard surfaces such as ceramic tile, etc.
(Do not use on painted surfaces.)
The Dust Shroud is not used when using the scouring pad.
❏
CAUTION: Always wear safety glasses when turbo sanding.
!
