9
Getting Started
BAG SUPPORT STRAP
Check to make sure the Bag Support Strap
④
is connected to
the Top Adaptor
⑤
. The Bag Support Strap provides the support
required for proper operation of the Disposable Filter Bag.
If it is not connected, thread the strap through the small hole of the Top
Adaptor. Then place the hole in the strap over the stud on the Top Adaptor.
Finally, insert the adaptor and new filter bag into the Outer Permanent
Bag
①
and close the zipper completely for maximum performance.
NOTE: In order for the Filtration System to perform effectively, use only
Kirby® Micron Magic® HEPA Filtration Bags. If the outside bag is torn
or damaged, please replace immediately.
❏
4
EMPTYING THE MINI EM-TOR® COLLECTOR
The Mini Em-Tor
⑥
collector is designed to collect large, heavy
particles which can be emptied by removing the Mini Em-Tor collector.
To remove, grasp the Mini Em-Tor collector in the handhold
provided and rotate it away from the body of the system as far
as it will go, then lift it off.
The top of the bag is released from the handle by pressing the Bag
Release Button
⑯
. After removing the Mini Em-Tor collector and the
entire Bag Assembly, position the front opening of the Mini Em-Tor
collector over a newspaper and shake it to remove the particles.
➤
To replace the Mini Em-Tor collector, re-attach the entire Bag
Assembly by inserting the Bag Latch Tab
②
at the top of the bag
into the slot under the Bag Release Button
⑯
.
Finally, line up the raised indicator arrow of the Mini Em-Tor collector
with the indicator arrow on the Air Exhaust Port
⑲
. Rotate the Mini
Em-Tor collector towards the Sentria® system and lock it in place.
NOTE: The Mini Em-Tor collector must be securely locked in place
or the unit will not operate.
❏
1
2
USING THE BELT LIFTER
The Belt Lifter
⑳
on your Sentria system is used for two purposes:
l) To engage or disengage the Brush Roll. When the Brush Roll is
disengaged, the Sentria system can be used as a straight suction
cleaner (page 13), and;
2) To allow removal of the Power Nozzle when converting your Sentria
system for use with various attachments and optional accessories.
To avoid damaging the belt, turn the Sentria system OFF before using
the Belt Lifter.
➤
