3
VISION
™
• SCIBORG
®
NO CONFIRMATION CHIRP ARMING
This method is identical to “Normal Arm-
ing” except there is no siren chirping after
you Arm or Disarm. Ensure that all doors
are closed and then press Button-III on the
remote. After you press Button-III, the doors
will lock and hazard lights will flash once (if supported).
The Status LED will light solid for 5 seconds. (The siren
can’t be triggered while the LED is lit — See “Error Chirp”
on the next page.)
SILENT MODE ARMING
This method of Arming will completely dis-
able the siren (no confirmation chirps, no
warning chirps, no siren blast). Make a very
SHORT PRESS on Button-II then release. The
doors will lock and hazard lights will flash once (if sup-
ported). The Status LED will light for 5 seconds. (The
siren can’t be triggered while the LED is lit — See “Error
Chirp” on the next page.)
I
II
III
Push button
II
SYSTEM OPERATION
ARMING
NORMAL ARMING
This method is the typical way to Arm, with
the shock sensor enabled. Ensure that all
doors are closed and then press Button-I on the
remote. After you press Button-I, the doors
will lock and hazard lights will flash once (if supported).
The siren will chirp 1 time, and Status LED will light for
5 seconds. (The siren can’t be triggered while the LED is
lit — See “Error Chirp” on the next page.)
I
II
III
Push button
I
I
II
III
Push button
III
