Kioti DK4810, Manual

Page: 87 / 202

4
4
-
1
Function description and operating tips
(1) lifting / lowering lever
(a) lowering (b) lifting
one-touch liFting/lowering lever (iF applicable)
this lever is designed to ensure con-
venience of an operator during work.
when it needs to lift a rear imple-
ment while working after setting its
position as desired with the position
control lever, pull this lever to the lift-
ing (b) position to lift the implement
to the upper limit position. pushing
it to the lowering (a) position lowers
the implement to the preset lower
limit position. therefore, there is no
need to reset the height of the imple-
ment with the position control lever.
td2O460A td2O455A
turning the knob counterclockwise
increases the lowering speed while
turning it clockwise decreases the
lowering speed. also, turning it clock-
wise to its end can fix the implement
to a certain position.
(1) lowering speed control Knob
(a) high speed (b) low speed
liFting arm (lower linK)
speed control Knob
note
this knob does not control the
lifting speed of the lift arm.
•
caution
after stopping the engine,
make sure that the one-touch
lever is set in the lowering po-
sition. otherwise, an accident
may occur to a person work-
ing behind the tractor.
if it is inevitable to set the le-
ver in the lifting position, fix
the lever with the position lock
bolt.
•
•
TD210-호주향-DK4810,5310,5810(HS)-031 31 2019-03-29 오후 6:01:13