Kioti DK4810, Manual

Page: 173 / 202

57
7
-
1
maintenance
(1) radiator cap (2) reservoir tank
(a) full (B) low
6. install the radiator cap securely.
7. start and idle the engine for few
minutes.
8. stop the engine and let it cool.
9. Drain water and cooling system
cleaner and close drain cock.
then, fill with antifreeze and
water mixture and close radiator
cap securely.
10. run tractor at idle until up to op-
erating temperature.
td2O732A
Coolant capacity
8.9 l (2.35 u.s.gal.)
11. check the coolant level in the
reservoir tank. if the level is low,
add coolant.
IMPORTANT
Do not start engine without
coolant.
Use clean, fresh water and
anti-freeze to fill the radiator
and reservoir tank.
When the anti-freeze is mixed
with water, the anti-freeze mix -
ing ratio must be no less than
50% mixture of water and anti -
freeze.
Securely tighten radiator cap. If
the cap is loose or improperly
fitted, water may leak out and
the engine could overheat.
If the radiator cap has to be re -
moved, follow the caution above
and securely retighten the cap.
Use clean, fresh water and anti-
freeze to fill the reservoir tank.
If the coolant leaks, contact
your local kIOTI Dealer.
•
•
•
•
•
•
•
CAUTION
To avoid accidents:
Do not remove the radiator cap
while the coolant is hot. steam
or scalding liquids released
from hot cooling system can
burn you seriously. Cool down
the engine first.
Even though the coolant is
cooled down, turn the cap to
its first stop and then wait un -
til it is depressurized before
removing the cap completely.
•
•
TD210-호주향-DK4810,5310,5810(HS)-031 31 2018-09-07 오전 10:37:54