Kioti DK4810, Manual

Page: 66 / 202

4
-
10
dK4810(h,hs) / dK5310(h,hs) / dK5810(h,hs)
the pto selection switch is used
to switch between the automatic
operation and manual operation of
the pto. the pto switches can be
used as follows:
1. pto automatic operation
when the pto selection switch is
set in the automatic position, lifting
the hydraulic lift arm (or an imple-
ment) to given height automatically
disengages the pto.
pto selection switch (iF
applicable)
(1) pto selection switch
(a) automatic (b) Manual
td2O414A
(1) pto switch
td2O413b
pto switch (on / oFF)
the pto switch is used to supply
power from the tractor to the imple-
ment.
Make sure to put this switch into the
“oFF” position before starting the en-
gine. otherwise, the engine cannot
be started.
the rear pto rotates at 540 rpm
when the engine speed is approx.
2,444 rpm.
to activate the pto, press and turn
the switch clockwise. to deactivate it,
press the switch once.
caution
to avoid personal injury and
accident:
before disassembling or
cleaning the pto system,
make sure that the pto switch
is in the “oFF” position, the
engine is stopped, and all
parts are stopped.
always keep the pto driving
part clean. also, check the
pto cover is closed while pto
is in operation.
disengage the pto while driv-
ing the tractor on the public
road.
be careful not to get your
hand, foot, cloth, or hair into
any driving part while the pto
is in operation. you can be se-
verely injured.
make sure that no one is around
the tractor and implement while
the pto is in operation.
•
•
•
•
TD210-호주향-DK4810,5310,5810(HS)-010 10 2019-03-29 오후 6:00:54