5
5
-
opERATIoN
The 3-point hitch can be controlled by
the position control lever.
1. The position control lever is used
to lift or lower the lifting arm (lower
link) of the 3-point hitch.
2. pushing the lever forward lowers
the lower link while pulling the le-
ver backward lifts the lower link.
3. The height of the lower link is pre-
cisely controlled proportional to the
position of the lever.
(1) position control lever
(A) lowering
(B) lifting
td2O519a
3-POINT HITCH CONTROl POSITION CONTROl
(1) lower link
td2O520a
4. The lower link is lifted by the hy-
draulic energy of the tractor while it
is lowered by potential energy of its
own weight. Therefore, the imple-
ment cannot be lowered by the hy-
draulic pressure.
5. Therefore, the implement attached
to the lower link may be lifted by
protrusion on the ground when it is
lowered to the ground. It is called
as "floating."
(1) lowering Speed control lever
(A) High speed
(B) low speed
6. The lowering speed of the lower
link is proportional to the applied
weight but can be controlled by
adjusting the draining passage of
the hydraulic fluid. (See “Lowering
speed control valve of lifting arm”
on page 4-29)
td2O455a
TD210-호주향-DK4810,5310,5810(HS)-023 23
2018-09-07 오전 10:36:40
Summary of Contents for DK4810
