SAFETY FIRST
G
EN
ER
A
L
EN
G
IN
E
CL
U
TC
H
TRANSMISSION
H
ST
RE
A
R
A
X
LE
BR
A
KE
FR
O
N
T
A
X
LE
HYDRAULIC
EL
EC
TR
IC
ST
EE
RI
N
G
DT66-W00
Jan. 2007
9
-27
DK35/40/45/50SE
Remove the oil seal (1), dust seal (2) and O-ring
seal (3) from the gland bushing.
7.
Remove the thrust bearing (2) and two bearing
races (1) from the body.
8.
(1) Bearing race
(2) Thrust bearing
T46W933A
T46W935A
T46W934A
T46W936A
(1) Motor housing
(2) Sleeve
Pull the sleeve and spool (2) from the bottom of
the motor housing (1). The sleeve is a sealed unit
in steering motor housing and should be rotated
slightly during removal.
Install the sleeve and spool while turning them in the
housing supported by pin. At this time, keep them
horizontal as much as possible. This helps prevent
the pin from sliding out of its hole and catching in
the housing. Pull the sleeve out as straight as pos
-
sible to prevent it from becoming jammed.
9.
(1 Sleeve
(3) Pin
(2) Spool
Remove the pin (3) from the sleeve (1) and spool (2)
assembly.
10.
(1) Centering spring
Push the spool upward out of the sleeve slightly
and pull the centering springs (1) outward. Then re
-
move the spool from the bottom side of the sleeve.
11.
T46W937A
STEERING SYSTEM - SERvICING
M32_EN_A4.indb 27
2007-02-02 오전 10:45:27