SAFETY FIRST
G
EN
ER
A
L
EN
G
IN
E
CL
U
TC
H
TRANSMISSION
H
ST
RE
A
R
A
X
LE
BR
A
KE
FR
O
N
T
A
X
LE
HYDRAULIC
EL
EC
TR
IC
ST
EE
RI
N
G
DT66-W00
Jan. 2007
9
-21
DK35/40/45/50SE
6. SeRVICInG
6.1 STeeRInG CYLInDeR
T46W923A
Lift the front axle using a hydraulic jack.
Remove the steering cylinder cover (1).
1.
2
.
T46W924A
Remove both pins (1, 2) from both steering cylinders.
Disconnect the steering hose (4) and remove the
steering cylinder.
The steering cylinder should be replaced as an
assembly. Therefore, replace the steering cylin
-
der as a unit in case of leakage.
3.
4.
•
T46W925A
Tightening torque for pin mounting bolt in the steer
-
ing cylinder
Tightening torque for pin mounting bolt in
steering cylinder (m8) .... 23.5 ~ 27.5 nm
2. ~ 2.8 kgf-m
17. ~ 20.3 lb-ft
Installation of pin mounting nut on the steering cyl
-
inder
Tighten the nut slightly using a proper tool.
Tighten the nut until the tightening torque is
sharply increased, and tighten it further until the
next pin hole is shown. Insert the split pin at this
point.
Bend the split pin so that it does not come off.
Tightening torque of steering hydraulic hose
Tightening torque of steering
hydraulic hose (3) ........... 2.5 nm
2.5 kgf-m
18.1 lb-ft
1.
2
.
•
•
•
3.
Removal
Reinstallation
STEERING SYSTEM - SERvICING
M32_EN_A4.indb 21
2007-02-02 오전 10:45:07