Kingston Technology MLWG2, User Manual

Page: 6 / 209

Document No. 480-16FUM-001.A00 Kingston MobileLite Wireless G2 Page 5 of 13
Getting to Know MobileLite Wireless G2
I
A B
C D E
F G H
A. USB 2.0 port - Allows you to connect an external USB Storage Device to MobileLite Wireless G2. It also
allows you to charge your mobile device.
B. SD slot - Allows you to connect a memory card (SD/SDHC/SDXC or any microSD w/ adapter) to MobileLite
Wireless G2.
C. Battery LED/Power* - Indicates current battery status and current power state.
D. Wi-Fi LED - Indicates current status of Wi-Fi broadcast.
E. Bridged LED - Indicates whether or not MobileLite Wireless G2 is bridged to an Internet gateway via Wi-Fi or
Ethernet.
F. Power button - Powers on or powers off the MobileLite Wireless G2 device. Short press (1 second): Power
bank mode/Long press (3 seconds): Wi-Fi mode.
G. Reset button - Allows you to reset the MobileLite Wireless G2 device to its original (default) configuration.
Hold the button down for more than 10 seconds.
H. Micro-B USB port - Allows you to charge MobileLite Wireless G2 or connect it to a standard USB port on your
computer for fast, easy data transfer. Each media expansion port will require its own drive letter if media are
inserted.
I. Ethernet port
– Allows you to connect an Ethernet cable to create a hotspot for wireless internet access. Wi-Fi
mode will temporarily disable while connected to Ethernet.
*
The battery LED also indicates how much battery time is left while the MobileLite Wireless G2 is powered on. Green indicates 51% - 100%
battery charge remaining; orange indicates 25% - 50% battery charge remaining; and red indicates less than 25% battery charge remaining.