44
01/13424999894
Service Port Software
2. Adjustment possibilities using the Service Port Software
2.1 LED display on the vent switch
The LED display on the vent switch can be adjusted to
requirements and circumstances on an individual basis.
The display will thus differ depending on the current mode.
It can be set either to permanent display or to display for
5 seconds after pressing a vent switch. Other LED display
options are: permanently on, slow blinking, fast blinking or
very fast blinking. See the guidance in the "Visualisation,
3 LEDs on the vent switch" section.
2.2 Automatic step function for sensor operation
This function enables incremental OPEN traverse of the
window; the time per step (5-60 secs), the number of steps
(1-10) and the pause time (1-30 min) between the steps
can be set. This function is only an option when combined
with the activation time. If the unit is switched to auto mode
with this function activated, the drives close completely
(until the activation time is reached) and then open
according to the defined settings at the sensor input OPEN.
As soon as it switches to sensor input CLOSED, the drives
close again completely.
Note
: This function is deactivated when supplied.
Ventilation control panel iVent 8A