Installation Instructions
Listed Certified for USA. and Canada
This appliance may be installed in an aftermarket permanently located, manufactured (mobile home),
where not prohibited by local codes.
This appliance is only for use with the type of gas indicated on the rating plate.
This appliance is not convertible for use with other gases, unless a certified kit is used.
Model Number ZDV3318/3622
Stock #’s: ZDV3318N, ZDV3318LP, ZDV3622N and ZDV3622LP are Certified to:
ANSI Z21.88-2005, ANSI Z21.88a / CSA 2.33a-2007
Vented Gas Fireplace Heaters and CGA 2.17-M91, CSA P.4.1-02
Gas Fired Appliances For Use At High Altitudes
Read this complete manual before beginning installation.
These instructions must be kept with the unit for future reference.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance.
What To Do If You Smell Gas
Do not try to light any appliance.
Extinguish any open flame.
Do not touch any electrical switch.
Do not use any phone in your building.
Immediately call your gas supplier from a neighbour’s phone.
If you can not reach your gas supplier, call the fire department.
KINGSMAN INDUSTRIES
A Division of R-Co. Inc.
2340 Logan Avenue
Winnipeg, Manitoba, Canada R2R 2V3
Ph: (204) 632-1962
Warning:
If the information in these instruction are not followed exactly, a fire or explosion may result
causing property damage, personal injury or loss of life. Refer to this manual. Installation and service
must be performed by a qualified installer, service agency or the gas supplier.
Printed in Canada December 17, 2008 Part # 3318-MAN
“Zero Clearance”
Direct Vent Gas Fireplace
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
