LOG C42 - LOGC43 LOG
PLACEMENT
GUIDELINES - FOR MODELS ZDV4224/ZDV4228
FIGURE
A
- Log set Ember kit and Crushed rock
FIGURE
B
- Rear log holder
.
Step (1)
Units are equipped with screws or latches.
T
o
remove glass
door
, either remove screws or unfasten latches and lift door of
f bottom
door retainer
.
Step (2)
Remove logs from carton and inspect each log.
Step (3)
V
erify to see that the ember plates (2 pcs) are between front
and back burner
.
Step (4)
Break glowing embers into thumbnail size. Place glowing
embers on to the surface of the front burner
, to the surface of the ember
plates and over crossover to the same height as ember plates. Height on
front burner 1/2” to 3/4”. Height on ember plates 3/4” to 1”. Do not
cover back air openings on ember plates.
Step (5
)
Place front log over burner
, against decorative grate. Be
sure that front log is tight up against the decorative grate.
Ember
plate
Air
Opening
11
