MQZCV48
MQLOGF48D
⚠
WARNING:
Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury.
*These items are supplied with the fireplace.
STEP 1:
Pull up [Qty. 3]
Log
Tabs
on Glass Tray.
STEP 2:
Set up Logs as
described below.
Log 1
is placed against back
wall of firebox.
Log 2
is placed against
left
side
wall of firebox and onto front
edge of burner and up against
Log Tab 1
.
Log 3
is placed on
right
side of
firebox against back wall. Pull
up to
Log Tab
2
.
Log 4
is placed directly in front
of burner and resting on Log 3.
Pull up to
Log Tab 3
.
Log 5
is placed between Log 2
and Log 4 in front of Burner.
Log 6
is placed directly onto
burner and resting on Log 2.
4
2
1
3
*Embers
*Lava Rock
*Vermiculite
*Insulation Wool
5
6
(Continued)
LOG TAB 2
LOG TAB 1
LOG TAB 3
LOG TAB 3
41
Summary of Contents for MQZCV48LP
