Kingsman MQZCV48LP, Installation Instructions Manual, Page: 18 / 77

ZCV47S1BL Basic Finishing 2: With Surround and Existing Screen
PARTS LIST: [1] Surround and [8] DT screws.
Surround attaches to safety screen supplied with fireplace.
Install Screen with Surround attached as described in in
Child Safety Screen Installation
section.
Step 1: Frame Fireplace with nailing tabs oriented as
shown.
Step 2: Use Drywall to finish face of wall.
NOTE: Drywall will be flush with fireplace face.
Drywall
4-1/8” MIN
4” MIN
ZCV48
Fireplace
Opening
ZCV47S1BL
Surround
To Attach Surround to Screen:
1. Place surround face down on protected surface.
2. Lay Screen onto back side of surround.
3. Fold up tabs on top & bottom of surround.
4. Drive screws into screen through holes in top & sides as shown.
A Tile Lip Kit is Available. Part No. ZCV-TLK
Required
Clearance if
facing (i.e. stone)
is used on top of
wall surface.
Floor
4” MIN
NOTE: SURROUND COVERS FIREPLACE FRAME BY 1-1/4”
ON SIDES AND 3/4” ON TOP
SURROUND IS 50-9/16” WIDE BY 43-3/16” TALL.
18