31
LOGC31 PLACEMENT for GLMVF40 BURNER GRATE
Step (1)
Place notched area of Log #1 against the O.D.S.
Pilot as shown. Place Log31C-A and Log31C-B along the
grate bar as shown.
Step (2)
Place flat area of Log #2 against Tab 2 and over top
of Log #1. Locate log mounting hole on Log #3. Position hole
on Tab 3 as shown. Do not place log over the center burner
tube.
Step (3)
Locate the 2 mounting holes on the bottom of Log #4
and position them onto Tabs 4A and 4B. Place V area of Log
#5 on the grate bar and then rest Log #5 on the flat area of
Log #2.
Step (4)
Place the flat area of Log #6 on the burner pan. Lean
against Logs #4 and #5. Locate flat notched areas of Log #2
and Log #3. Place Log #7 onto these with charred branch in
the down position.
Summary of Contents for GLMVF40MVN
Page 2: ...2...