background image

 
 

3

INTRODUCTION

Thank you for choosing KingsBottle for your 
refrigeration needs. For safe use, please read this 
manual carefully and follow all instructions. Store 
this manual near the device for quick referral. 

We cannot guarantee safety if this applicant is used 
for objects other than the intended use or used in 
any way other than laid out in this manual. 

The contents of this manual can change without 
notice due to improvement of performance or 
function of the device. Contact our sales 
representatives if there are any questions about the 
information contained in this manual. No part of this 
manual should be reproduced in any form without 
written permission from KingsBottle. 

For important safety notices, please read pages 4-6. 
Only trained and authorized personnel should 
operate this biomedical freezer. Only qualified 
service personnel or an authorized agent should 
install or provide maintenance for this device. 

Only use spare parts sold by KingsBottle. If other 
accessories are used, we cannot be held 
responsible for any adverse consequences. 
However, the user can apply for verification of third-
party accessories from KingsBottle before use. 

You should inspect and maintain the device 
according to the specified time intervals found in 
this manual.. 

Due to di

erences between each model and 

improvements of the devices, the actual product 
may di

er from the diagrams included. 

Users have an obligation to be responsible for their 
own safety. 

When products are removed from the freezer, always 
wear protective gloves. Handling contents or 
touching inside the unit without protective gear can 
cause frostbite or other injuries. 

CONTENTS

BIOMEDICAL FREEZERS

TABLE OF CONTENTS

Chapter

Contents

Page

Part I

Precaution For Safe Operation

4-5

Part II

Precaution For Use

6

Part III

Installation Instructions

 

7-8

Part IV

Diagram & Description of Freezer 

9

Part V

Operating the Freezer 

10-13

PART VI

Maintenance Guide

14

Part VII

After-sale Service

 

Annex1: Rechargeable Battery 
Maintenance,Installation,Replacement and Disposal 

 

Annex2: About installation of printer paper for optional 
printer. 

 

Annex3: Remote alarm terminal and RS485 interface 

15-16

Part VIII

Specifications

17

Part IX

Warranty Information

18

Summary of Contents for MLD270



















Reviews: