5
PART I PRECAUTIONS FOR SAFE OPERATION
Use a power supply outlet that is properly grounded to
prevent electric shock. If it is not grounded, it will be
necessary to install a ground by a qualified engineer.
Don't lengthen the line randomly. If you need to use
2.5mm 2 copper line, keep the 4mm 2 lines to connect the electrical
outlet.
Be sure to install the unit on a sturdy floor, no shaking
or tilting.
Never install the unit in a flammable or volatile location.
This may cause explosion or fire.
Never install the unit in a humid place, outdoor or a place
with direct sunlight. Deterioration of the insulation may
result which could cause current leakage or electric
shock.
CAUTION:
Failure to observe WARNING signs could result in
injury to personnel and damage to the unit or
associated property.
•
This biomedical freezer should not be used for inanimate
objects, flowers, or other items that are not suitable for low-
temperature settings.
•
During usage, the temperature inside the unit is very low. Do
not touch the interior surface or any objects inside without
protective gear.
•
Always disconnect the power plug when the unit is not used
for long periods.
•
When you request any repair or maintenance, have a safety
check sheet prepared for the safety of service personnel.
•
Check all settings on the controller prior to restarting the
freezer.
•
The biomedical freezer should only be used as a storage
device.
•
Always hold the handle while closing the door. This will reduce
the likelihood of injury to your hand.
•
Restrict access to the key from unauthorized personnel to
avoid unexpected injury.
•
Locate an even and sturdy floor for installation. This will prevent
the unit from tipping or falling. Improper installation may result
in injury.
•
Regularly check the filter and clean it as necessary. This will
avoid possible overheating of the unit.
•
When moving the unit, do not tilt it more than 45 degrees.
Transportation should be handled with care.
SAFETY
BIOMEDICAL FREEZERS
Summary of Contents for MLD270
Page 2: ...2...