5
The Jump Starter features a smart clamp system to provide Low Voltage, Reverse Polarity, Short
Circuit, Reverse Charge and Automatic Power Shut off Protection.
Q:
How do you turn off the jump starter?
A:
This product will power off automatically when no load is detected or when charging is
complete.
Q:
How long does it take to fully charge the jump starter?
A:
Around 7 hours
Q:
How many times can this jump starter charge my phone?
A:
Dependent on the phones battery capacity this jump starter can charge most smart phones 3
to 4 times.
USING THE LED TORCH
FAQ
LED INDICATOR
SITUATIONS
The red/green light will flash
when connected to the car
battery
Ready to jump start
The red light is always on
-Check whether the clamp is reverse connected.
Check the clamp is not short-circuiting
-Check if the two clamps are connected together or if
both clamps are connected to the same piece of metal.
The red light is always on
Reverse charging protection, the voltage of the car
battery is higher than 12.6V.
The red light flashes quickly
The temperature of the clamp exceeds 65(+/-5) degrees.
-Remove the clamp until the red/green light flash
The green light flashes slowly
The voltage of the jump starter is too low.
-Charge the jump starter
