2
SAFETY INFORMATION
Always follow safety precautions when using electrical equipment.
Please keep this instruction manual with the jump starter at all times.
Ensure the jump starter and all accessories are in good working order before each use. This
product is designed for 12V vehicles only.
Once vehicle is started, remove the jump starter as soon as possible to prevent possible damage
to the unit.
• DO NOT connect the two clamps together.
• DO NOT modify or disassemble the jump starter.
•
DO NOT operate near flames or flammable objects.
• DO NOT expose the unit to extreme heat.
• DO NOT allow overheating.
• DO NOT overcharge.
• DO NOT
expose to heat or fire. Avoid storage in direct sunlight.
• DO NOT short-circuit. Do not store haphazardly in a box or drawer where damage and/or
short-circuiting may occur.
• DO NOT subject cells or battery to mechanical shocks or damage.
• In the event of battery leakage, do not allow liquid to contact skin or eyes. If contact made,
wash affected area with copious amounts of water and seek medical advice.
• DO NOT
use any charger or electrical cables/clamps other than those specifically provided.
• In use, make sure cables are fully inserted into sockets, and make sure clamps are properly
connected to battery terminals.
• Provide a two-minute cool-down break between attempts at starting a vehicle.
• Although water-resistant (IP67), do not wet, soak or submerge the product.
KEEP PRODUCT AWAY from children.
WARNING: FAILURE TO FOLLOW SAFETY
INFORMATION MAY RESULT IN FIRE OR EXPLOSION!
