When you turn on the power switch of the device, the CNC display screen
will automatically enter the "startup interface" as shown in Figure 3. After
the interface flashes for about 3 seconds, the device will automatically
enter the "program setting" interface as shown in Figure 4.
www
.kingnodetech.com
Equipment Electrical Schematic Diagram
Interface 2: Program Setting
Interface 1: Start-up Screen
Part IV CNC Operation Interface Directions
05
06
Figure 2: Equipment Electrical Schematic Diagram
Figure 3: Start-up Screen
Figure 4: Program Setting Interface
[email protected]
www.kingnodetech.com
