Place unit on the Bath:
Place the adjustable Bath - Top rest on the edge of the
bath nearest to you, and then lower the unit across the
bath
as
shown.
Once the unit is resting on the bath, ensure that all the
bath - top rests are supported by at least 50mm (ap
prox 2 inches) on either side of the bath top. These are
not adjusted until the changer is on the bath. DO NOT
USE
UNTIL
SECURE!
Check for obstructions:
Unfold the deck to check clearance around the unit
before you secure it in place. Check for clearance
above taps and grab - handles, around any shelves
or shower screen, walls and any additional shower
fixings.
You must must be able to have all four bath top rests
resting on the bath and the changer fully unfolded
before using the Leit Shower Changer.
If there are any obstructions, fold the changer back up
and secure the unit in place as in the following step.
Secure the Leit Shower Changer:
1
WALL
2
3
4
