The Unfolded trolley:
Your trolley should look like this illustration at
this
point.
Apply brakes to all 4 castors, and then pull each
of the 4 changer release knobs to ensure
the catches are ready to receive the changers.
Install Changer:
There
are
two
members
which
locate
across
the two latches on each of the trolley legs.
This
step
will
vary
slightly
depending
on
which
model
you
have.
If
you
are
unsure
seek
advice
from
Kingkraft.
Keep the ends of the changers folded over so
you
can
clearly
see
what
you
are
doing.
Guide on of the changer bars onto one side of
the trolley. You can rest the changer across the
catchers
whilst
you
position
the
changer.
The changer bar is fitted with feet-these should
locate either side of the each catch. This ensures
that the changer is central on the trolley frame.
Once
you
have
positioned
one
side
of
the
changer, push it down in to the latches. This will
rotate and lock once the changer bar is in place
-continue
to
press
until
you
hear
both
latch
Changer Feet
plates ‘click’ into this locked position. Check the
changer
is
secure
in
both
catches.
Move to the other end of the trolley, repeat the
process and check again that all 4 latches are
locked and the changer is firmly secured.
Not secure
Secure
