Installing side rails: (if applicable)
Lift the side rail clips (they should stay open) and then
insert the pins on the either end of the side rail into the
locator holes on your trolley frame. The spring clips
must be on the outside of the unit.
If you intend to place the user onto the Changer before
fitting the side rail, it is advisable to lift the spring
clips on the safety rail to the open position before
moving the user. This will make locating the side rail
easier
and
faster.
Once both pins are fully inserted, lower the spring clips
back down. Ensure they locate fully underneath the
tube that the pin passes through. This will prevent
accidental
removal.
Fit the side rail on the far side of the deck (furthest
away from you) at this point. Before fitting a side rail
on the front of the unit, it is advised that this is done
after the user is placed on the deck, to reduce your
required lifting height. However, this is at the discretion
of
the
carer.
You should have the side rail ready, and be familiar
with how to fit the side rail before placing any user
onto
the
unit.
You should always ensure that the rails are
undamaged, still fit onto the changer and the spring
clips still function correctly each time before placing
anybody
onto
the
unit.
Your Leit Trolley is now fully ready for use!
