Leit Over Bath Changer-Instructions for Use
Unpack Unit:
Remove the Leit Shower Changer (over bath) and any
accessories from the box. Check everything is present
and
there
isn’t
any
damage.
Unfold the legs:
Make a note of the front side of the unit; the printed
text on the changer is readable from the front, and the
leg release plungers are only on the front side.
Pull the leg release plunger until the leg becomes free.
Rotate the leg as shown until the leg release ‘clicks’
into
its
locked
position.
Repeat this for the opposite leg. Ensure the legs are
both
locked
in
place
before
proceeding.
Operation of Bath-Top Adjusters:
Extend the Adjustable Bath Top Rests to their
maximum
length;
release
Thumbscrew
‘1’
which
should
allow ‘A’ to slide freely. Pull part ‘A’ as far as it will
go in the direction shown, then tighten thumbscrew ‘1’
Locate the Internal Adjuster Feet out of the way; release
Thumbscrew ‘2’ which should allow ‘B’ to slide
freely. Position part ‘B’ as far as it will move towards
the centre of the Shower Changer (in direction shown)
The
tighten
Thumbscrew
‘2’.
Repeat
this
with
Internal
Adjuster Foot on the oppposite side of the changer.
2
1
2
A
1
B
