Kingfisher NMBC1000 Original Instructions Manual Download Page 3

Page: 3 / 50

NMBC1000

Getting

started...

Safety information

Safety warnings

General safety warnings

1. Never allow children, persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge or people unfamiliar with these instructions

to use the machine, local regulations may restrict the

age of the operator.

2. Children shall not play with the appliance. Cleaning

and user maintenance shall not be made by children.

General power tool safety warnings

WARNING!

Read all safety warnings,

instructions, illustrations and specifications

provided with this power tool.

Failure to follow

all instructions listed below may result in electric

shock, fire and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to

your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

Work area safety

Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

Keep children and bystanders away while

operating a power tool. Distractions can cause you

to lose control.

No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 3

10/20/21 12:02 PM

Summary of Contents for NMBC1000



















































Search results

Summary of Contents for NMBC1000

Reviews:

Related manuals for NMBC1000

Brands by name

Popular brands

Kingfisher NMBC1000, Original Instructions Manual

Search results

Summary of Contents for NMBC1000

Reviews:

Related manuals for NMBC1000

Brands by name

Popular brands