EN
27
EN
In
more
detail...
NMBC1000
Product functions
Intended use
This electric brush cutter and grass trimmer NMBC1000 is designated with a
rated power input of 1000 Watts.
With the cutter blade attached, the product is intended to cut heavier weeds,
brush and similar vegetation with a thickness of up to 10 mm.
With the trimmer head attached the product is intended to cut smaller types of
weed, lawn grass or similar soft vegetation.
The product should not be used to cut unusually thick grass or vegetation, wet
grass or to shred leaves etc.
For safety reasons it is essential to read the entire instruction manual before first
operation and to observe all the instructions therein.
This product is intended for private domestic use only, not for any commercial
trade use. It must not be used for any purposes other than those described.
Harness
The harness (19) helps the operator to carry the product.
1. Place the harness (19) so that it
runs over the left shoulder, crossing
the chest and back. The securing
clip (19a) must be located at the
right hip. The quick release (19b)
must be in front (Fig. 12).
2. Adjust the length of the harness
(19) so that the securing clip (19a)
is approximately 15 cm below your
waist.
3. Attach the securing clip (19a) to the
loop the suspension sleeve (8) (Fig.
13).
4. Lock the harness on the suspension
sleeve (8). (Fig. 14).
19
19b
19a
Fig. 12
8
19a
Fig. 13
8
19a
Fig. 14
No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 27
10/20/21 12:02 PM
