manualshive.com logo in svg

Kingfisher FPLM132H-6, Original Instructions Manual

Share
Download
Kingfisher FPLM132H-6 Original Instructions Manual Download Page 8

EN

08

FPLM132H-6

Technical and legal information

Getting 

started...

Safety warnings

4. Never store the product with petrol in the tank inside

a building where fumes can reach an open flame or

spark.

5. To reduce the fire hazard, keep the engine, silencer and

petrol storage area free of grass, leaves, or excessive

grease to reduce the fire hazard.

6. Allow the engine to cool before storing in any enclosure.

Clean and maintain the product before storage.

7. Check the grass catcher frequently for wear or

deterioration.

8. If the fuel tank has to be drained, this should be done

outdoors.

9. Wear strong work gloves when removing and re-

assembling the cutting device.

10. Replace worn or damaged parts for safety. Use only

the genuine replacement parts and spare parts.

11. Ensure that only replace the recommended cutting

means (blade) with the right type.

Fuel handling

1. Before refuelling, stop the engine, disconnect the

spark plug connector and let the product cool. Fuel

and fuel vapours are highly flammable. Take care when

handling fuel. Never smoke when you are refuelling

the product. Do not refuel the product, if there is an

open fire in the vicinity!

2. Always  use  suitable  aids  such  as  funnels  and  filler

necks. Do not spill any fuel on the product or its exhaust

system. There is a risk of ignition. However, if fuel

should be spilled, then you must remove it carefully

from all parts of the product. Any residue which may

be present must be completely removed, before the

product is operated!

MNL_FPLMP99H-4_GB_V05_200911.indd   8

9/11/20   5:23 PM

Summary of Contents for FPLM132H-6




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands