manualshive.com logo in svg

Kingfisher FPLM132H-6, Original Instructions Manual

Share
Download
Kingfisher FPLM132H-6 Original Instructions Manual Download Page 40

EN

40

EN

Care and maintenance

In 

more 

detail...

FPLM132H-6

Maintenance

13a

Fig. 25

Checking engine oil

NOTE: 

Check the oil level and quality before each use.

The oil must be replaced after every 6 months or after 50 hours of 

operation.

1. Unscrew and remove the oil tank cap (21).

2. Gradually add good-quality engine oil (SAE 10W-30). Allow the oil to settle.

3.

into the tank opening without tightening the cap, and then remove the dipstick 

again.

4. The oil level must be between the oil level markings (approx. 400 ml). Add

5. 

6. Wipe the spilt oil with a soft cloth and reattach the oil tank cap (21).

Draining engine oil

NOTE: 

Drain the oil every 50 hours of operation of every 6 months.

WARNING! 

Before tilting the product for maintenance, the fuel tank 

or explosion!

1. The oil should be clear and thick. If the oil is sticky or contains dirt particles,

draining the oil is necessary.

2. Place a suitable container under the oil drain screw (21a) to collect the drained

MNL_FPLMP99H-4_GB_V05_200911.indd   40

9/11/20   5:23 PM

Summary of Contents for FPLM132H-6




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands