manualshive.com logo in svg

Kingfisher FPLM132H-6, Original Instructions Manual

Share
Download
Kingfisher FPLM132H-6 Original Instructions Manual Download Page 42

EN

42

EN

Care and maintenance

In 

more 

detail...

FPLM132H-6

Repair

This product does not contain any parts that can be repaired by the consumer. 

Contact an authorised service centre or a similarly qualified person to have it 

checked and repaired.

Storage

NOTE:

 Good storage conditions are important for keeping your 

product trouble free.

1. Stop the engine and disconnect the spark plug connector (15).

2. Clean the product as described in the “Cleaning” section.

3. Store the product and its accessories in a dry, frost-free, well-ventilated place.

4. Always store the product in a place that is inaccessible to children. The ideal

storage temperature is between 10°C and 30°C.

5. We recommend using the original package for storage or covering the product

with a suitable cloth or enclosure to protect it against dust.

6. Empty the fuel tank if you are not going to use the product for an extended

period of time (more than 30 days) and before storing it for the winter.

Transportation

1. Stop the engine and disconnect the spark plug connector (15).

2. Adjust the cutting height to the highest position as described in the “Cutting

height adjustment” section.

3. Attach transportation guards, if applicable.

4. Always transport the product by the upper handle bar (1).

5. If a suitable loading ramp is not available, ask another person for assistance

when loading the product on a vehicle.

6. Protect the product from any heavy impact or strong vibrations which may

occur during transportation in vehicles.

7. Secure the product to prevent it from slipping or falling over, loss of fuel,

damage and injury.

MNL_FPLMP99H-4_GB_V05_200911.indd   42

9/11/20   5:23 PM

Summary of Contents for FPLM132H-6




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands