Kingfisher FPLM132H-6 Original Instructions Manual Download Page 7

Page: 7 / 51

FPLM132H-6

Getting

started...

Technical and legal information

>inspect for damage

>replace or repair any damaged parts

>check for and tighten any loose parts

• whenever you leave the product,

• before refuelling.

25. Never touch the exhaust, exhaust guard or cooling

fins when the engine is hot.

26. Never carelessly touch hot parts of the product, you

can burn yourself. While the product is in operation or

shortly thereafter, its parts such as the exhaust pipe,

engine, and other surfaces are extremely hot! Pay

attention to the markings on the product.

27. Make sure that the air vents of the combustion engine

are clear. Keep the air vents free of dust, dirt particles,

gases and fumes.

28. Never start or run the engine indoors. The exhaust

fumes are dangerous, containing carbon monoxide,

an odourless and deadly gas. Operate this product

only in well ventilated outdoor areas.

Maintenance and storage

1. Follow the maintenance and repair instructions for

this product. Never carry out any modifications of the

product. Never change the preset rotary speed or

the engine and product settings. Information about

maintenance and repair is provided in this user manual.

2. Keep all nuts, bolts and screws tight to be sure the

product is in safe working condition.

3. Improper maintenance, using non-genuine parts, or

removing / modifying safety components may lead

to malfunction / failure of the product and injury of

operators. Many accidents are caused by poorly

maintained products.

MNL_FPLMP99H-4_GB_V05_200911.indd 7

9/11/20 5:23 PM

Summary of Contents for FPLM132H-6




















































Search results

Summary of Contents for FPLM132H-6

Reviews:

Brands by name

Popular brands

Kingfisher FPLM132H-6, Original Instructions Manual

Search results

Summary of Contents for FPLM132H-6

Reviews:

Brands by name

Popular brands