Stopping
> Release the throttle interlock (12a) and throttle control
(12c) and let the product to run at its idle speed for 10 – 15
seconds (Fig. 13).
> Set the ignition switch [12b] to “
STOP
” position to switch
engine off.
Fig.13
Trimming
>
weed, lawn grass or similar soft vegetation.
> Hold the product firmly so that it sits with a gap between
the product and your right side.
> Stand upright, do not lean forward and pay attention to
posture. Keep both feet apart to help retain your balance.
> Hold the cutting head just above the ground at an angle of
approximately 30° (Fig. 14a).
> Move the product with a slow regular arc from left to right
before moving it back to the starting position before
trimming the next area (Fig. 14b).
The trimming head is intended to cut smaller types of
In
m
o
re
d
e
ta
il
..
.
36
FPGTP25-2
30°
Fig.14a
Fig.14b
Operation
EN
