> Only use the product in daylight or good artificial light.
> Keep your body upright during operation. Do not lean
forward. Make regular breaks and change your working
position to stay concentrated.
> Keep firm footing and balance during operation. Always
use the harness, if provided.
> Stop the engine before
•
cleaning or when clearing a blockage,
•
checking, carrying out maintenance or working on the
product,
•
adjusting the working position of the cutting attachment,
•
leaving the product unattended.
> Ensure that the product is correctly located in a designated
working position before starting the engine.
> While operating the product, always ensure that the
operating position is safe and secure.
> Do not operate the product with a damaged or worn
cutting attachment.
> Keep the engine and silencer free of debris, leaves and
excessive lubricant to reduce fire hazards.
> Always ensure that all handles and guards are fitted when
using the product. Never attempt to use an incomplete
product or one fitted with an unauthorised modification.
> Always use two hands to operate a product fitted with two
handles.
> Always be aware of your surroundings and stay alert for
possible hazards of which you may not be aware due to the
noise of the product.
> Be careful when handling any cutting attachment / sharp
edge fitted for trimming the filament line length. Ensure a
new filament trimming line is installed correctly before
turning the product on.
> Always ensure that air vents are kept clear of debris.
> Only use cutting attachments as listed in the technical data
within these instructions. The use of other attachments
leads to hazards resulting in personal injuries and damage
to property.
13
G
e
tt
in
g
s
ta
rt
e
d
..
.
FPGTP25-2
Safety information
EN
