> Store the product in a dry, clean place protected from direct
sunlight only after the fuel tank has been emptied and the
product is cleaned. The product must be stored inside only
under these conditions.
> If the cutting attachment strikes any foreign object or the
product starts making any unusual noise or vibration, shut
off the power source and allow the product to stop.
Disconnect the spark plug connector from the spark plug
and take the following steps:
•
inspect for damage,
•
check for, and tighten, any loose parts,
•
have any damaged parts replaced or repaired with parts
having equivalent specifications.
Operation
> This product should not be used for any other purpose than
described. National regulations can restrict the use of the
product.
> While operating, always wear substantial footwear and long
trousers. Do not operate the product when barefoot or
wearing open sandals. Wear protective glasses or goggles.
> Ensure the area to be worked is clear from stones, sticks,
wire etc. or other objects that could damage the product.
> Thoroughly inspect the area where the product is to be used
and remove all objects which can be thrown by the product.
> Before using the product and after any impact, check for
signs of wear or damage and repair as necessary.
> Never operate the product with damaged guards or without
the guards in place.
> Keep hands and feet away from the cutting attachment at all
times and especially when switching on the engine.
> Never allow children or people unfamiliar with the
instructions to use the product.
> Stop using the product while people, especially children, or
pets are nearby.
12
G
e
tt
in
g
s
ta
rt
e
d
..
.
FPGTP25-2
Safety information
EN
