www.kingfisherboats.com
22
22
KINGFISHERBOATS.COM
With boat in the water or on level
ground, open the motor box cover
to access the heater hose drains on
the Starboard side of the engine.
Remove the two drain caps and
observe water draining from the
ports into the bilge. As an added
measure, it is recommended to
blow air through the system to
ensure all water is flushed out.
When draining stops, reinstall caps
and close motor box cover.
Water drained into the bilge should be removed by draining through hull bilge plug or by
turning on the bilge pump.
UHMW Hull Option Maintenance
Warning!
Avoid serious injury or death or damage to property. UHMW hull
option must be checked prior to each use to confirm fastener integrity and
security. Loose fasteners must be tightened immediately; damaged
fasteners should be replaced. Failure to do so could result in erratic boat handling
resulting in damage to person or property.
