www.kingfisherboats.com
26
30
KINGFISHERBOATS.COM
New Component Installation Instruction
If a fixture or addition to your boat becomes loose, it increases the risk of exposure.
Check your fixtures regularly. To safely and effectively install or replace components,
follow the below instructions.
1. Place component and hole the
markings with a pen
2. Ensure there are no
obstructions on the back side
of your mounting location
before drilling.
3. Drill and deburr holes. Clean up
all metal chips and shavings so
that none will get trapped in
your newly installed component
4.
Apply a generous amount of
sealant such as Sikaflux 291,
Loctite UR 3370 or 3M 5200
