Kingfisher 3663602914389, Instruction Manual

Page: 8 / 225

8
Quick start
The controls
Setpoint temperature
Frost protection mode
Heating LED
ON/Standby
OK or Boost (3 sec.)
Programme mode
ECO mode
Comfort mode
Open window
Prolonged absence
Lock
Temperature settings
or Menu selection
Menu
The icon and the value being adjusted flash. Flashing stops when the set
-
ting is validated by pressing
OK-boost
, or after 30 seconds of inaction (any
modification to the setting is then cancelled).
HEATING ON / STANDBY
- Press the
button to switch the heat on or off (standby).
Two short beeps that increase in pitch sound when switched on and three
beeps that decrease in pitch sound when switched off.
When switched on, the setpoint temperature and current mode are dis
-
played alternatively every 3 seconds ;
Standby ON ON
The
icon is the heating LED. It is displayed on and off cyclically.