Cleaning and Storage
CAUTION!
■
Remove the plug from the mains socket before cleaning the device.
■
Never immerse the motor unit in water or other liquids.
■
Be careful when handling the inserts; the blades are sharp!
■
Do not use corrosive or abrasive cleaning agents to clean the device. These could
damage the surface.
• As required, wipe down the motor unit with a damp cloth. Then dry the device with
a dry cloth.
• Clean the insert holder, the inserts and the plungers with clear, warm water and a
little mild detergent or clean them in the dishwasher.
• Store the device in a dry place that is not accessible to children and animals.
Troubleshooting
If the device should stop working properly, fi rst check whether you are able to
correct the problem yourself. If you are not, contact the customer service
department (see the "Customer Service" chapter). Do not try to repair a faulty device
yourself!
6.
Use the plunger to push food further down.
7.
Let go of the On/Off switch to switch off the device.
8.
Remove the mains plug from the socket after use.
9.
Remove the insert after use.
10.
Clean the device and the accessory parts after
each use in the manner described in the "Cleaning and
Storage" chapter.
Problem
• Is the plug inserted in the mains socket correctly?
• Is the mains socket defective? Try another mains socket.
• Check the fuse of your mains connection.
• Are you holding down the On/Off switch? To switch on the
device, you must hold down the switch.
Possible Cause / Solution
The device does not
work.
