2.
Rotate the insert holder a quarter turn to the left until
it engages.
3.
To release the insert holder from the drive shaft,
rotate the insert holder a quarter turn to the right and
remove it from the motor unit.
Inserting / Removing the insert
1.
Select a suitable insert (see also the "Items Supplied
and Device Overview" chapter, "Accessories" section).
2.
Insert the insert into the holder. Make sure that the
insert is seated correctly on the drive shaft.
3.
Place the quater-turn fastener on the drive shaft.
Make sure that the fasteber is seated correctly on the
drive shaft.
4.
Turn the fastener to the left, to secure the insert.
5.
In order to remove the insert, turn the fastener to the
right to release the fastener.
6.
Remove the quater-turn fastener.
7.
Remove the insert.
Using the Device
1.
Place the device on a level, non-slip surface.
2.
Connect the device to a properly installed plug
socket.
3.
Place a bowl beneath the opening of the insert
holder in order to catch your food.
4.
Switch on the device by holding down the On/Off
switch. Press the On/Off switch briefly one to two times
before you place any food into the feed tube so that the
cutter insert locks on the drive shaft of the motor unit.
5.
Then hold down the On/Off switch and place the
food which is to be cut up into the feed tube.
