Page 7
If using the included booster
mounting bracket, remove
the booster from the bracket.
Fasten bracket to wall, then
snap booster back into bracket.
TIP
5. Route the cable to where it will enter the vehicle.
6. Drill an appropriately sized hole and feed the cable into the vehicle.
7. Seal the roof hole so it is completely waterproof (inside and outside).
Fasten cable to roof every 12-18.”
8. Inside, place booster in desired location or install the booster to wall.
Connect cable to booster.
9. Connect inside antenna cable to booster and place inside antenna in
position.
10. Plug booster into power source.
IMPORTANT!
Make sure to avoid any cabling, pipes, etc. that may be
damaged by drilling.
