5
Fire, explosion and high pressure hazards
To minimize the risk of serious injury, death or property damage while using the Sparco System:
a
Read, understand and follow all instructions and safety precautions in the manual, and on this Sparco System and on any label for
chemicals used with this Sparco System including Sparco Chamber.
DANGER
a
Never use fast dissolving chlorine tablets, liquid bleach, or calcium hypochlorite in the Sparco System.
a
Never mix Trichlor chlorine tablets with Calcium Hypochlorite, or with any other form of concentrated chlorine or other chemicals.
a
Never add any other types of chlorine, pH adjusters, shock treatments or algaecides through the skimmer.
These products should be added directly into the pool if required.
a
Do not contaminate the Sparco System or Sparco Chamber with dirt, organic matter, pool chemicals (such as calcium hypochlorite or
pool shocks), fertilizers or other household chemicals. Contact between any of these substances and the Sparco System or Sparco Chamber,
will result in a chemical reaction with the generation of heat, liberation of hazardous gasses and fire or explosion.
WARNING
a
Use only Sparco Chamber in the Sparco System. Never use bulk chemicals.
a
To prevent the build up of gas pressure in the Sparco System, be sure the pool return line valves are open – except when opening
or servicing the unit.
a
Do not inhale fumes from the Sparco System or Sparco Chamber.
a
Avoid sparks, smoking, or any open flame near Sparco System or chemicals.
a
Do not exceed maximum operating pressure of 50 psi or maximum temperature of 104º F.
a
Do not remove the cap while under pressure. Always turn off pump and bleed off pressure before opening Sparco System.
a
Do not install automatic or fast shut off valves downstream of Sparco System.
a
Always install the Sparco System AFTER a heater (if applicable) on the return line.
a
Always install any additional sanitizing equipment AFTER and NEVER BEFORE the Sparco System is installed on the return line.
a
Do not permit children to use or climb on this product. This product must be positioned to prevent children from using it as a
means of access to the pool.
a
Always stand clear of the Sparco System during pump start-up.
a
Replace Sparco System if you see signs of cracks, damage or degradation to the Sparco System body or cap.
NOTICE
a
Prior to pressurizing, check with your dealer to ensure your plumbing connections meet building codes.
a
Failure to properly winterize your Sparco System could result in freeze damage. (
See page 14 for winterizing details.
)
Review this label before installing or operating this System. Contact King Technology at 800-222-0169 if this label is missing from your Sparco System.
Safety Label on Sparco System
