background image

19 

Limited One-Year Warranty

Made in U.S.A.

Patents: kingtechnology.com/IP

King Technology, Inc. will warrant this unit with a complete replace-
ment for the original purchaser, should it prove defective by reason 
of improper workmanship and/or material for a period of one (1) 
years from the date of original purchase/installation. This warranty 
covers body, cap and control dial excluding O-rings. King Technology 
holds the option of replacing any defective part without charge if it 
is determined to be all that is needed to correct any situation. Parts 
used for replacement, with the exception of O-rings, are warranted 
for the remainder of the original warranty.

1. To obtain warranty service, you must deliver product to King Tech-
nology or its nearest authorized dealer. Shipping expenses are the 
purchaser’s responsibility. The name of the nearest authorized deal-
er can be obtained at frogproducts.com/find-a-dealer or by calling 
King Technology at 1-800-222-0169. Proof of purchase is required 
when requesting warranty service. Purchaser must present the sales 
receipt or other document which establishes proof of purchase. 

2. This warranty does not cover defects caused by: modification, 
alteration, repair or service of the product contrary to the accom-
panying instructions; physical abuse to or misuse of the product or 
operation or installation in a manner contrary to the accompanying 
instructions. This warranty also excludes all costs arising from the 
installation, adjustment, removal or replacement of defective units 
or parts. This warranty also excludes any and all claims arising out 
of the chemicals used in the product or their characteristics. 

3. Any express warranty not provided for herein, and any remedy for 
breach of warranty or breach of contract which, but for this provision, 
might arise by implication or operation of law, is hereby expressly 
excluded and disclaimed. The implied warranties of merchantability 
and of fitness for any particular purpose are expressly limited to a 
term of one year. Some states do not allow limitation on how long an 
implied warranty lasts, so the above limitation may not apply to you. 

4. Under no circumstance shall King Technology be liable to pur-
chaser or any other person for any damage or loss incurred because 
of any chemicals used in the product or their physical characteris-
tics, or interruption of service of the product, or any special, inci-
dental or consequential damages or losses, whether arising out of 
breach of warranty, breach of contract or otherwise. Some states 
do not allow the exclusion or limitation of incidental consequential 
damages, so the above limitation or exclusion may not apply to you. 

5. Misuse or failure to use the proper Sparco Chamber may cause 
damage to equipment or personal injury. All warranty null and void 
if this product is not used with the recommended Sparco Chamber.

Register your warranty at kingtechnology.com/product-registration

Summary of Contents for 01-02-5510





















Reviews: