22
Replacing the Control Dial O-Rings
Replacing the Cap O-Ring
1.
3.
5.
Center of locking pin
2.
4.
SILICONE
LUBRICANT
FROG Leap Infuzer Maintenance
In the back of the FROG Leap
Infuzer, depress center of
locking pin with a fi nger and pull
pin out of dial.
Turn control dial back and forth
as you pull it out of the housing.
Replace both o-rings. Apply
silicone lubricant that came
with your FROG Leap Infuzer on
o-rings.
Carefully insert control dial
back into housing.
Replace locking pin by pushing it
through the slots on the dial until
it locks into place.
Lubricate o-ring every couple
of months with silicone
lubricant that came with your
FROG Leap Infuzer.
DO NOT USE petroleum
based lubricants.
1.
1.
2.
2.
3.
4.
5.
5.
SILICONE
LUBRICANT
Place new o-ring in bottom
half of groove.
Place your thumbs on each
side of the cap over the
o-ring in the groove.
Roll your thumbs back and
forth over the o-ring while
pushing upward until the
o-ring falls into the top of
the groove.
Bottom half
of groove.
Top half of
groove.
O-ring in top
of groove
4.
3.
Product # 01-22-9971
Replacing Knobs
Back of
FROG
Leap
Infuzer
Front of
FROG
Leap
Infuzer
To replace, simply unscrew old knob and
replace with the new one.
Remove old o-ring.
Replacing Knobs
