Page 5 of 16 King Pigeon Hi-Tech. Co., Ltd. Page 5 of 16 Ver 1.0 File No.:RTU501610
A Professional GSM Alarm System designer and manufacturer!
GSM Transformer Alarm System &GSM House Alarm System&
GSM Telemetry Units & GSM GPRS Logging System
Http://www.GSMalarmsystem.com [email protected]
GSM SMS IR Controller X1, GSM ANT X1, Temperature Diode X1 ( 25°=10K,1% precision), User
Manual X1(CD), Connector X1,AC/DC Adaptor X1.
4. Physical Layout
4.1 GSM SMS IR Controller physical layout
Interface Instruction 1
OFF/ON
Switch ON/OFF the unit.
Reset
Press it then switch on the controller, the parameters have been reset to default
settings.
Learning
This button for learning IR(Air-Conditioner’s Infrared Remote) Transmitter
OFF/T1~6
T1 Position Led, when learning IR signal to T1, will flick, after learned successful, Led
will always on.
T2
T1 Led off, T2 Led on then learn to IR signal to T2 Position;
T3~T6
The same as T2, the other Led will off. Press learning button to loop T1 to T6 one by
one.
Status
Switch on GSM SMS IR Controller: Off;
Registered GSM Network successful: Always Green;
Registered GSM Network failure: Off;
Enter to Learn IR Signal Mode: Red;
Learning IR Signal: Red and Green
Receiving and Sending SMS: Green and flick red color.
Learning
IR Receiver, while learning the IR Signal, the IR’s IR Transmitter must face this IR Led.
IR TX
IR Transmitter, must face the Air-Conditioner’s IR Receiver.
