Page 13 of 16 King Pigeon Hi-Tech. Co., Ltd. Page 13 of 16 Ver 1.0 File No.:RTU501610
A Professional GSM Alarm System designer and manufacturer!
GSM Transformer Alarm System &GSM House Alarm System&
GSM Telemetry Units & GSM GPRS Logging System
Http://www.GSMalarmsystem.com [email protected]
Before installing the GSM SMS IR Controller, please help to test the system firstly, including power supply,
gsm signal, etc.
7.1 Insert SIMcard into GSM SMS IR Controller
In one side of the GSM SMS IR Controller, please install the GSM SIM card and GSM Antenna.
7.2 Learning IR Transmitter signal to GSM SMS IR Controller.
Step1:
Press the Learning Button and switch on the GSM SMS IR Controller, then loose it and the GSM
SMS IR Controller will remove all saved IR Transmitter signals at T1~T6. And enter into learning
mode. The T1 Led will flick, and the Status Led will be red and green color.
Step2:
Press the Learning Button till the Status Led change to green and T1 Led flicking. Then press the
IR(Infrared Remote of the Air-Conditioner) function button(The one what you want to learn to the
GSM SMS IR Controller, for T1, it is special for the ON/OFF function. So please press the switch
ON/OFF button ), when T1 Led change always on and Status LED turns off, then means the
learning IR Signal to GSM SMS IR Controller T1 position operation successful.
Step3:
Press the Learning Button again, T1 LED will off, T2 Led will flick, press the IR function button,
when T2 Led change to Green and Status LED turns off, then means the learning IR Signal to
GSM SMS IR Controller T2 position operation successful.
Tips:
The Switch Button on IR’s panel only used for switch off the Air-Conditioner in the RTU5016.
